Room appliances

1. To ensure the air conditioner operates , all balcony doors in the room must be closed. IF ANY OF THEM ARE OPEN, THE AIR CONDITIONER WILL NOT FUNCTION.

2. ON / OFF button: Turns the power on/off.

3. FAN speed button: Adjusts the fan speed: AUTO / LOW / MEDIUM / HIGH.

4. Temperature adjustment buttons: Adjusts room temperature when cooling and heating.

5. COOL: One-touch cooling operation.

6. HEAT: One-touch heating operation.

7. SWING ↕ button (vertical): Adjusts the air flow direction vertically.

8. SWING ↔ button (horizontal): Adjusts the air flow direction horizontally.

9. Operation MODE selection button: Selects the operation mode: AUTO / COOLING / DRY (dehumidifying) / HEATING / FAN (fan only).

10. TURBO cooling / heating button: Warms or cools rooms at the fastest rate.

11. HEALTH button: Used to access Wi-Fi operation.

12. QUIET button: Sets appliance operation to lowest noise output level.

13. SLEEP button: Sets the sleep mode auto operation.

14. TIMER button: Sets the countdown timer to turn the power ON / OFF.

15. ROOM °C Temperature display button: Displays the temperatures: ROOM / SET.

16. DISPLAY button: Turns indoor temperature display ON / OFF.

17. FRESH button: Keeps the head unit free of excess moisture by running a 3-minute cycle every time the unit is turned off.

18. CLEAN button: End of season cleaning process to dry the inside of the indoor unit or when the appliance is not going to be used for an extended period of time.

19. SPOT SWING button: Sets a fixed direction for air flow horizontally.

20. ECO button: Sets appliance to the most efficient operation.

21. Wireless Transmitter LED

22. LCD screen: Displays settings and operation modes.

23. Blank buttons: Not used.

Turn On and Turn Off The Appliance:

• If the appliance is in Stand-By-Mode:

  • Press the On/Off button for at least 1 second.

  • A buzzer signal will acoustically indicate the successful operation.

  • On all heaters, a '0' will appear, and the Decimal Point of the heater will flash (1 sec on, 1 sec off).

  • If there is no operation within 10 seconds, the display of all heaters will turn off.

  • If the displays are turned off, the heater will be set into Stand-By-Mode.

• If the appliance is in Operating-Mode:

  • Press the On/Off button for more than 2 seconds.

  • The appliance will switch off and set back into Stand-By-Mode.

• Turning off the appliance at any time:

  • The appliance can be turned off by pressing the On/Off button at any time, even if other buttons are pressed simultaneously.

  • If there is residual heat remaining, it will be indicated in the correspondent heat setting Heater Display.

Select Heater:

• For the selected heater, set the heat level between 1-9 by touching the Heat Setting Buttons.

• The buttons must be pressed within 3 seconds; otherwise, the heater selection will be erased and the Decimal Point will disappear.

• If there is no further operation within 10 seconds, the heater falls back into Stand-By-Mode.

• The heat setting can always be changed by pressing the Heat Setting Buttons between levels 1-9.

• Each button operation or display change will be indicated by a buzzer signal.

Turn on the Dual Zone:

• After selecting the desired heater, activate the dual zone by actuating the corresponding button.

• A buzzer signal will confirm the activation.

• The corresponding Dual Zone Indicator will light up statically.

• Touch the button a second time to toggle the status of the dual zone: from dual zone on to dual zone off and back again.

• The extension zone can only be activated after setting a level between 1-9 on the basic zone of the heater.

Set Cooking Level With and Without Heat Boost:

• All heaters are equipped with heat boost functionality.

• If the heat boost is active, the heater will operate with maximum power for the period of the heat boost time, which depends on the selected heat setting.

• This is indicated by a flashing 'A' alternating with the heat setting value (e.g., 0.5 sec 'A' and 0.5 sec '9') in the heater display.

• Once the heat boost time ends, only the heat setting will be indicated.

• To activate heat boost:

  • Set the heater level to 9 by pressing the Heat Setting Button starting from level 0.

  • 'A' will be indicated alternating with level 9, indicating that heat boost is active.

  • The heat boost can be turned off by pressing the Heat Setting Button until '0' appears.

  • To use heat boost again, it can always be activated by actuating the Heat Setting Button if the heat setting is set to level 9.

  • In the heat display, 'A/9' will flash.

• Push the door to 100% close position pLock the door
• input 4-6 pin code and press ‘LOCK’,
• Then safe is locked now.
• The code (4-6 digits) you use to Lock the door is THAT correct code for next opening.

Wifi Name :  Stay365 Wifi  Password : mystay365

1. Find the network named **Stay365 Wifi**.

2. Your device will automatically redirect you to the browser where you can enter the password.

3. If it doesn't open automatically, open a browser yourself and refresh it to display the page where you can enter the password.
 

The hairdryer is either in the wardrobe drawer or in the bathroom.

Dear Guests,
For your comfort, please note that our balcony doors are sliding doors and not hinged doors. Kindly slide them to open.
Thank you for your understanding and cooperation.

Dear Guests,

Since you have checked in using codes, your key card is already inside your room.

To use the electrical power in your room, please insert the key card into the card switch located next to the main door of your room. This card also allows you to open your room door.